Zahri-Edu · Lecture notes

Analytic Geometry

Zahri-Edu for Mathematics logo

From algebraic techniques to conic sections, lines and planes in space, parametrization, and quadric surfaces. Each chapter ends with common student mistakes, a quiz, written problems and a short essay, and a mock exam closes the notes.

Mathematical Preliminaries

Algebraic tools used throughout the course: completing the square, distance and inequalities, and the hyperbolic functions.

1.1Completing the Square

Completing the square rewrites a quadratic expression so that the variable appears once, inside a perfect square. It exposes the vertex of a parabola and the centre of a circle, and it is the first step in reducing most conic equations.

Theorem

For every real b, and for a\neq 0:

x^2+bx=\Bigl(x+\frac b2\Bigr)^2-\frac{b^2}{4},\qquad ax^2+bx+c=a\Bigl(x+\frac{b}{2a}\Bigr)^2+\Bigl(c-\frac{b^2}{4a}\Bigr).

The parabola y=ax^2+bx+c has vertex \bigl(-\tfrac{b}{2a},\;c-\tfrac{b^2}{4a}\bigr).

The method has three steps: factor out the leading coefficient, add and subtract the square of half the middle coefficient, then group the perfect square. Setting the result equal to zero gives the quadratic formula

x=\frac{-b\pm\sqrt{b^2-4ac}}{2a}.

With two variables, the equation x^2+y^2+Dx+Ey+F=0 becomes

\Bigl(x+\frac D2\Bigr)^2+\Bigl(y+\frac E2\Bigr)^2=\frac{D^2+E^2}{4}-F,

a circle with centre \bigl(-\tfrac D2,-\tfrac E2\bigr) when the right side is positive, a single point when it is zero, and empty when it is negative.

Example

Identify x^2+y^2-6x+4y-12=0.

Group the terms: (x^2-6x)+(y^2+4y)=12. Add 9 and 4 to both sides:

(x-3)^2+(y+2)^2=25.

It is the circle with centre (3,-2) and radius 5.

More completing the square

Use these rows as a drill. The last column says what the result tells you.

ExpressionCompleted formWhat it shows
x^2+3x+1\bigl(x+\tfrac32\bigr)^2-\tfrac54minimum -\tfrac54 at x=-\tfrac32
2x^2-12x+72(x-3)^2-11vertex (3,-11)
3x^2+2x-13\bigl(x+\tfrac13\bigr)^2-\tfrac43vertex \bigl(-\tfrac13,-\tfrac43\bigr)
-x^2+4x-1-(x-2)^2+3opens down, maximum 3 at x=2
-2x^2+8x-3-2(x-2)^2+5maximum 5 at x=2

In two and three variables, completing the square in each variable reveals the shape.

EquationCompleted formShape
x^2+y^2-6x+8y+9=0(x-3)^2+(y+4)^2=16circle, centre (3,-4), radius 4
4x^2+y^2-8x+6y-3=0\dfrac{(x-1)^2}{4}+\dfrac{(y+3)^2}{16}=1ellipse, centre (1,-3)
x^2-4y^2-2x-16y-19=0\dfrac{(x-1)^2}{4}-(y+2)^2=1hyperbola, centre (1,-2)
y^2-6y-4x+17=0(y-3)^2=4(x-2)parabola, vertex (2,3), p=1
x^2+y^2+4x-6y+13=0(x+2)^2+(y-3)^2=0a single point (-2,3)
x^2-y^2-2x-4y-3=0(x-1)^2-(y+2)^2=0two intersecting lines
x^2+y^2+2x+6y+20=0(x+1)^2+(y+3)^2=-10no points (empty set)
x^2+y^2+z^2-2x+4y-6z-11=0(x-1)^2+(y+2)^2+(z-3)^2=25sphere, centre (1,-2,3), radius 5

Example: leading coefficient

Reduce 2x^2+8x+1. Factor out the leading coefficient from the x terms only: 2(x^2+4x)+1. Add and subtract 4 inside the bracket:

2\bigl[(x+2)^2-4\bigr]+1=2(x+2)^2-7.

Check by expanding: 2(x^2+4x+4)-7=2x^2+8x+1.

Example: a circle that shrinks to a point

Which set is x^2+y^2+4x-6y+13=0?

Complete both squares: (x+2)^2-4+(y-3)^2-9+13=0, so (x+2)^2+(y-3)^2=0. Both squares are non-negative, so both must be zero: the set is the single point (-2,3), not a circle.

Example: an equation with no points

What is x^2+y^2+4x+10=0?

(x+2)^2+y^2=4-10=-6. A sum of squares cannot be negative, so there are no real points. The equation has no shape.

1.2Distance, Relations, and Inequalities

Analytic geometry turns geometric statements into equations and inequalities. A relation between coordinates, such as y\ge x^2, describes the set of all points whose coordinates satisfy it.

Distance and midpoint

The distance between A(x_1,y_1,z_1) and B(x_2,y_2,z_2) and the midpoint M of AB are

|AB|=\sqrt{(x_2-x_1)^2+(y_2-y_1)^2+(z_2-z_1)^2},\qquad M=\Bigl(\tfrac{x_1+x_2}{2},\tfrac{y_1+y_2}{2},\tfrac{z_1+z_2}{2}\Bigr).

In the plane, drop the z terms.

Basic inequalities

For vectors \mathbf u,\mathbf v and positive numbers a,b:

|\mathbf u+\mathbf v|\le|\mathbf u|+|\mathbf v|,\qquad |\mathbf u\cdot\mathbf v|\le|\mathbf u|\,|\mathbf v|,\qquad \frac{a+b}{2}\ge\sqrt{ab}.

For a real number x: |x-a|<r \iff a-r<x<a+r.

Example: distance

Find the distance between A(1,2,3) and B(4,6,15).

|AB|=\sqrt{3^2+4^2+12^2}=\sqrt{169}=13.

Example: a region

Describe \{(x,y):\ x^2+y^2\le 4,\ y\ge x\}.

The first condition is the closed disc of radius 2 centred at the origin. The second is the half-plane on or above the line y=x, which passes through the centre. The region is a half-disc with area \tfrac12\pi\cdot 2^2=2\pi.

1.3Hyperbolic Functions: Definitions and Identities

The hyperbolic functions play the same role for the hyperbola x^2-y^2=1 that sine and cosine play for the circle.

Definition

\sinh x=\frac{e^x-e^{-x}}{2},\qquad \cosh x=\frac{e^x+e^{-x}}{2},\qquad \tanh x=\frac{\sinh x}{\cosh x}.

Identities

\cosh^2x-\sinh^2x=1,\qquad \sinh 2x=2\sinh x\cosh x,\qquad \cosh 2x=\cosh^2x+\sinh^2x,
\sinh(x\pm y)=\sinh x\cosh y\pm\cosh x\sinh y,\qquad \cosh(x\pm y)=\cosh x\cosh y\pm\sinh x\sinh y.
FunctionDerivativeInverse
\sinh x\cosh x\operatorname{arsinh}x=\ln\bigl(x+\sqrt{x^2+1}\bigr)
\cosh x\sinh x\operatorname{arcosh}x=\ln\bigl(x+\sqrt{x^2-1}\bigr),\ x\ge1
\tanh x1-\tanh^2x\operatorname{artanh}x=\tfrac12\ln\tfrac{1+x}{1-x},\ |x|<1

Because \cosh^2t-\sinh^2t=1, the point (\cosh t,\sinh t) lies on the right branch of x^2-y^2=1. This is the basis of the parametrizations in Section 2.6 and of the hyperboloid parametrizations in Chapter 7.

Example

If \sinh x=\tfrac34, find \cosh x, \tanh x and x.

From \cosh^2x=1+\tfrac9{16}=\tfrac{25}{16} and \cosh x>0 we get \cosh x=\tfrac54 and \tanh x=\tfrac35. Then e^x=\cosh x+\sinh x=2, so x=\ln 2.

Q1Chapter 1: Quiz and Problems

Common student mistakes

Common errorx^2+6x=(x+6)^2-36

Correctx^2+6x=(x+3)^2-9

Add the square of half the coefficient, (6/2)^2=9, not the square of the coefficient.

Common errorx^2+y^2-6x=7\ \Rightarrow\ (x-3)^2+y^2=7

Correct(x-3)^2+y^2=7+9=16

Whatever you add to one side to complete a square must be added to the other side.

Common error2x^2+8x+1=2(x+2)^2+1

Correct2x^2+8x+1=2(x+2)^2-7

The factor 2 multiplies the added 4, so 2(x+2)^2 contains an extra 8 that must be subtracted.

Common error\sqrt{3^2+4^2}=3+4=7

Correct\sqrt{3^2+4^2}=5

A square root of a sum is not the sum of the square roots.

Common error\cosh^2x+\sinh^2x=1

Correct\cosh^2x-\sinh^2x=1

The hyperbolic identity has a minus sign. The plus sign gives \cosh2x.

Common error|x-2|<3\ \Rightarrow\ x<5

Correct-1<x<5

An absolute value inequality gives two bounds, 2-3<x<2+3.

Multiple-choice quiz

1 Complete the square: x^2-8x+3.
2 The circle x^2+y^2+2x-4y-4=0 has radius
3 The distance between A(1,-2,3) and B(3,2,7) is
4 \tanh(\ln 3)=
5 The equation x^2+y^2-6x+8y+25=0 describes
6 The equation x^2+y^2+4x+10=0 describes
Answered 0 of 6 · Correct 0

Written problems

Problem 1. Show that x^2+y^2-4x+6y+13=0 is a single point and find it. (4 marks)

Show solution

Group and complete the squares: (x-2)^2-4+(y+3)^2-9+13=0, so

(x-2)^2+(y+3)^2=0.

A sum of two squares is zero only when both are zero, so the only solution is the point (2,-3).

Problem 2. Prove from the definitions that \cosh 2x=2\cosh^2x-1. (4 marks)

Show solution

2\cosh^2x-1=2\cdot\dfrac{e^{2x}+2+e^{-2x}}{4}-1=\dfrac{e^{2x}+e^{-2x}}{2}+1-1=\dfrac{e^{2x}+e^{-2x}}{2}=\cosh2x.

Problem 3. Complete the square in each case and say what it shows: (i) x^2-10x+30; (ii) 3x^2+12x+5; (iii) -2x^2+8x-3; (iv) x^2+y^2-10x+4y+4=0. (8 marks)

Show solution

(i) (x-5)^2+5: minimum 5 at x=5.

(ii) 3(x^2+4x)+5=3(x+2)^2-12+5=3(x+2)^2-7: vertex (-2,-7).

(iii) -2(x^2-4x)-3=-2(x-2)^2+8-3=-2(x-2)^2+5: maximum 5 at x=2.

(iv) (x-5)^2-25+(y+2)^2-4+4=0, so (x-5)^2+(y+2)^2=25: the circle with centre (5,-2) and radius 5.

Short essay

Essay. Explain why completing the square links algebra to geometry. Use at least two examples from this chapter. (about 150 words)

Show model answer

Completing the square turns an expression whose geometry is hidden into one where it can be read off. For x^2+y^2+Dx+Ey+F=0 it gives the centre (-\tfrac D2,-\tfrac E2) and the radius, and it also tells us when the set is a point or empty. For ax^2+bx+c it gives the vertex of the parabola and, by setting the expression to zero, the quadratic formula. The same step later reduces every conic with no xy term to its standard form. A strong answer states the identity, shows one worked reduction, and says what is read from the result.

Conic Sections

Parabola, ellipse and hyperbola: their Cartesian equations, geometric properties and parametric forms.

2.1Introduction to Conic Sections

A conic section is the curve obtained by cutting a double cone with a plane. The angle of the plane decides the curve: parallel to a generator gives a parabola, steeper than the generators gives a hyperbola (both nappes), and shallower gives an ellipse. A plane perpendicular to the axis gives a circle.

Focus–directrix definition

Fix a point F (the focus), a line d (the directrix) and a number e>0 (the eccentricity). The conic is the set of points P with

|PF|=e\cdot \operatorname{dist}(P,d).

It is an ellipse when e<1, a parabola when e=1 and a hyperbola when e>1.

Every conic has an equation of degree two:

Ax^2+Bxy+Cy^2+Dx+Ey+F=0.
Sign of B^2-4ACCurve (non-degenerate)Eccentricity
<0Ellipse (circle if B=0, A=C)0\le e<1
=0Parabolae=1
>0Hyperbolae>1

Example

Classify x^2-4xy+4y^2+2x-y=0.

Here A=1, B=-4, C=4, so B^2-4AC=16-16=0. The curve is a parabola.

All possible shapes in the plane

A second-degree equation in x and y can describe nine different sets. Four are the true conics. The other five are degenerate, or empty, and they are the cases a careless classification misses.

ShapeStandard equationExample
Circle(x-h)^2+(y-k)^2=r^2,\ r>0x^2+y^2=9
Ellipse\dfrac{(x-h)^2}{a^2}+\dfrac{(y-k)^2}{b^2}=1\dfrac{x^2}{25}+\dfrac{y^2}{9}=1
Parabola(y-k)^2=4p(x-h) or (x-h)^2=4p(y-k)y^2=8x
Hyperbola\dfrac{(x-h)^2}{a^2}-\dfrac{(y-k)^2}{b^2}=\pm1\dfrac{x^2}{9}-\dfrac{y^2}{16}=1
Single point\dfrac{(x-h)^2}{a^2}+\dfrac{(y-k)^2}{b^2}=0x^2+y^2=0, the origin
Two intersecting lines\dfrac{(x-h)^2}{a^2}-\dfrac{(y-k)^2}{b^2}=0x^2-y^2=0, the lines y=\pm x
Two parallel lines(x-h)^2=a^2,\ a>0x^2=4, the lines x=\pm2
One line (double line)(x-h)^2=0x^2-2x+1=0, the line x=1
Empty set\dfrac{(x-h)^2}{a^2}+\dfrac{(y-k)^2}{b^2}=-1 or (x-h)^2=-a^2x^2+y^2+1=0

Equations with no shape

Some equations look like conics but have no real solutions, or only a point or a pair of lines. Complete the squares first. After translating, the equation takes the form AX^2+CY^2=G and the signs of A, C and G decide the shape.

SignsSet described
A, C same sign, G the same signellipse (circle if A=C)
A, C same sign, G=0single point
A, C same sign, G the opposite signempty set
A, C opposite signs, G\ne0hyperbola
A, C opposite signs, G=0two intersecting lines
one square only: AX^2=G with G the same sign as Atwo parallel lines
one square only: AX^2=0one line
one square only: AX^2=G with G the opposite signempty set
one square and a linear term: AX^2=BYparabola

Example: a point

Classify x^2+4y^2-2x+8y+5=0.

(x-1)^2-1+4\bigl[(y+1)^2-1\bigr]+5=0, so (x-1)^2+4(y+1)^2=0. Same signs and G=0: the single point (1,-1).

Example: two lines

Classify x^2-y^2-2x+2y=0.

(x-1)^2-(y-1)^2=0, that is (x-y)(x+y-2)=0. The set is the pair of lines y=x and x+y=2, meeting at (1,1).

Example: no points

Classify 4x^2+9y^2-8x+36y+76=0.

4(x-1)^2-4+9(y+2)^2-36+76=0, so 4(x-1)^2+9(y+2)^2=-36. A positive sum cannot equal a negative number: the set is empty.

Cutting a double cone with a plane produces all the conics. For the cone x^2+y^2=z^2, whose generators make 45^\circ with the axis, the curve depends on how far the plane is tilted from the horizontal.

Tilt of the plane from horizontalCurveEccentricity e=\sqrt2\sin(\text{tilt})
0^\circ (perpendicular to the axis)Circlee=0
between 0^\circ and 45^\circEllipse0<e<1
45^\circ (parallel to a generator)Parabolae=1
between 45^\circ and 90^\circHyperbola, one branch on each nappe1<e\le\sqrt2
Cone and cutting plane in 3D. Change the tilt and the offset of the plane. Drag the picture, or use the view sliders, to rotate it. The blue curve is the conic.
Conic explorer. Choose a curve, change its size, and move the point to check its defining property.

2.2Parabola: Cartesian Equations and Properties

A parabola is the set of points equidistant from a focus and a directrix (e=1).

Standard equations

With focus (p,0) and directrix x=-p, the parabola is y^2=4px. With focus (0,p) and directrix y=-p, it is x^2=4py. Moving the vertex to (h,k):

(y-k)^2=4p(x-h),\qquad (x-h)^2=4p(y-k).
  • The vertex is the midpoint between focus and directrix, and the axis of symmetry passes through both vertex and focus.
  • The chord through the focus perpendicular to the axis, the latus rectum, has length 4|p|.
  • A ray parallel to the axis reflects through the focus. This is why satellite dishes and headlights are paraboloids.

Example

Find the vertex, focus and directrix of y^2-4y-8x+20=0.

Complete the square in y: (y-2)^2=8x-16=8(x-2). So 4p=8, p=2.

Vertex (2,2), focus (4,2), directrix x=0, latus rectum length 8.

2.3Ellipse: Cartesian Equations and Properties

An ellipse is the set of points whose distances to two foci add up to a constant 2a (0<e<1).

Standard equation

With foci (\pm c,0) and a>b>0:

\frac{x^2}{a^2}+\frac{y^2}{b^2}=1,\qquad c^2=a^2-b^2,\qquad e=\frac ca.

Centred at (h,k): \dfrac{(x-h)^2}{a^2}+\dfrac{(y-k)^2}{b^2}=1.

  • Vertices (\pm a,0), co-vertices (0,\pm b), directrices x=\pm a^2/c.
  • For every point P on the curve, |PF_1|+|PF_2|=2a.
  • Latus rectum length 2b^2/a; area \pi ab.
  • If b>a the major axis is vertical and the foci are (0,\pm\sqrt{b^2-a^2}).

Example

Find the foci and eccentricity of 9x^2+25y^2=225.

Divide by 225: \dfrac{x^2}{25}+\dfrac{y^2}{9}=1, so a=5, b=3, c=\sqrt{25-9}=4.

Foci (\pm4,0), eccentricity e=\tfrac45.

2.4Hyperbola: Cartesian Equations and Properties

A hyperbola is the set of points whose distances to two foci differ by the constant 2a (e>1). It has two branches.

Standard equation

With foci (\pm c,0):

\frac{x^2}{a^2}-\frac{y^2}{b^2}=1,\qquad c^2=a^2+b^2,\qquad e=\frac ca>1.

The conjugate hyperbola \dfrac{y^2}{b^2}-\dfrac{x^2}{a^2}=1 has foci (0,\pm c).

  • Vertices (\pm a,0); directrices x=\pm a^2/c.
  • For every point P on the curve, \bigl||PF_1|-|PF_2|\bigr|=2a.
  • The branches approach the asymptotes y=\pm\dfrac ba x.
  • When a=b the hyperbola is rectangular, the asymptotes are perpendicular and e=\sqrt2.

Example

Analyse 16x^2-9y^2=144.

Divide by 144: \dfrac{x^2}{9}-\dfrac{y^2}{16}=1, so a=3, b=4, c=5.

Foci (\pm5,0), vertices (\pm3,0), e=\tfrac53, asymptotes y=\pm\tfrac43x.

2.5Parametric Equations of Parabolas and Ellipses

A parametric description gives x and y as functions of one parameter t. It is convenient for plotting, for computing tangents and for moving a point along the curve.

Parametrizations

Parabola y^2=4px and ellipse \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}=1:

x=pt^2,\ \ y=2pt\quad(t\in\mathbb R);\qquad\qquad x=a\cos t,\ \ y=b\sin t\quad(0\le t<2\pi).

For the ellipse centred at (h,k) use x=h+a\cos t, y=k+b\sin t.

The ellipse parameter t is the eccentric angle: it is the polar angle of the point on the auxiliary circle of radius a that lies above or below P. A rational alternative with u=\tan\tfrac t2 is

x=a\,\frac{1-u^2}{1+u^2},\qquad y=b\,\frac{2u}{1+u^2}.

The tangent to the ellipse at parameter t is \dfrac{x\cos t}{a}+\dfrac{y\sin t}{b}=1.

Example

Find the point of \dfrac{x^2}{25}+\dfrac{y^2}{9}=1 at t=\tfrac\pi3.

\Bigl(5\cos\tfrac\pi3,\ 3\sin\tfrac\pi3\Bigr)=\Bigl(\tfrac52,\ \tfrac{3\sqrt3}{2}\Bigr).

Check: \tfrac{25/4}{25}+\tfrac{27/4}{9}=\tfrac14+\tfrac34=1.

Example: parabola

For y^2=8x we have p=2, so the point at t=1 is (2,4). Check: 4^2=16=8\cdot2.

2.6Parametric Equations of Hyperbolas

For the hyperbola the identity \cosh^2t-\sinh^2t=1 replaces \cos^2t+\sin^2t=1.

Parametrizations

For \dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}=1:

\text{right branch: }(a\cosh t,\ b\sinh t),\qquad \text{left branch: }(-a\cosh t,\ b\sinh t),\qquad t\in\mathbb R.

Equivalent trigonometric form: x=a\sec t, y=b\tan t. With u=\tan\tfrac t2 it becomes rational:

x=a\,\frac{1+u^2}{1-u^2},\qquad y=b\,\frac{2u}{1-u^2}.

Example

On \dfrac{x^2}{9}-\dfrac{y^2}{16}=1 take t=\ln2. Then \cosh t=\tfrac54 and \sinh t=\tfrac34, so

P=\Bigl(3\cdot\tfrac54,\ 4\cdot\tfrac34\Bigr)=\Bigl(\tfrac{15}4,\ 3\Bigr).

Check: \tfrac{225/16}{9}-\tfrac{9}{16}=\tfrac{25}{16}-\tfrac9{16}=1.

Q2Chapter 2: Quiz and Problems

Common student mistakes

Common errorEllipse: c^2=a^2+b^2

CorrectEllipse: c^2=a^2-b^2; hyperbola: c^2=a^2+b^2

For the ellipse c<a, for the hyperbola c>a.

Common errorFor x^2=8y the focus is (0,8)

Correct4p=8, so p=2 and the focus is (0,2)

The coefficient of y is 4p, not p.

Common errorFor \frac{x^2}{9}-\frac{y^2}{16}=1 the asymptotes are y=\pm\frac34x

Correcty=\pm\frac43x

The slope is b/a with a^2=9 and b^2=16. Take square roots first.

Common errorFor a hyperbola, a^2 is the larger denominator

Correcta^2 is the denominator of the positive term

For an ellipse the larger denominator is a^2. For a hyperbola it can be either one.

Common errorThe hyperbola is (a\cos t,\ b\sin t)

Correct(a\cosh t,\ b\sinh t), or (a\sec t,\ b\tan t)

\cos^2+\sin^2=1 gives an ellipse, while \cosh^2-\sinh^2=1 gives a hyperbola.

Common errorx^2+y^2=-4 is a circle of radius 2

CorrectIt has no points

A radius squared cannot be negative. Always check the sign of the right-hand side.

Multiple-choice quiz

1 The parabola x^2=12y has focus
2 The eccentricity of \dfrac{x^2}{16}+\dfrac{y^2}{7}=1 is
3 The asymptotes of \dfrac{x^2}{9}-\dfrac{y^2}{16}=1 are
4 The curve x^2+xy+y^2=1 is
5 The curve (2\cosh t,\ 3\sinh t) is
6 Which plane cuts the cone x^2+y^2=z^2 in a parabola?
7 The plane x=1 cuts the cone x^2+y^2=z^2 in
8 The equation x^2-4y^2=0 describes
9 Which equation has no real points?
Answered 0 of 9 · Correct 0

Written problems

Problem 1. Find the equation of the ellipse with foci (\pm3,0) and vertices (\pm5,0). (4 marks)

Show solution

c=3 and a=5, so b^2=a^2-c^2=16.

\frac{x^2}{25}+\frac{y^2}{16}=1.

Problem 2. Show that the plane z=x+1 cuts the cone x^2+y^2=z^2 in a parabola and find its lowest point in the x-direction (the vertex). (5 marks)

Show solution

Substitute z=x+1: x^2+y^2=x^2+2x+1, so y^2=2x+1=2\bigl(x+\tfrac12\bigr). This is a parabola, as the plane is parallel to a generator of the cone (tilt 45^\circ).

The vertex has y=0 and x=-\tfrac12, so z=\tfrac12. The vertex is \bigl(-\tfrac12,0,\tfrac12\bigr). Check on the cone: \tfrac14+0=\tfrac14.

Problem 3. Show that (pt^2,2pt) lies on y^2=4px and that the tangent at this point is ty=x+pt^2. (6 marks)

Show solution

(2pt)^2=4p^2t^2=4p\cdot pt^2, so the point lies on the parabola.

Differentiating y^2=4px gives 2yy'=4p, so y'=\dfrac{2p}{y}=\dfrac1t at the point. The tangent is

y-2pt=\frac1t\,(x-pt^2)\iff ty-2pt^2=x-pt^2\iff ty=x+pt^2.

Problem 4. Complete the squares to decide what each equation describes: (a) x^2+4y^2-2x+8y+5=0; (b) x^2-y^2-2x+2y=0; (c) 4x^2+9y^2-8x+36y+76=0; (d) y^2+6y+9=0. (8 marks)

Show solution

(a) (x-1)^2+4(y+1)^2=0: the single point (1,-1).

(b) (x-1)^2-(y-1)^2=0, so (x-y)(x+y-2)=0: the lines y=x and x+y=2.

(c) 4(x-1)^2+9(y+2)^2=-36: the empty set.

(d) (y+3)^2=0: the single line y=-3.

Short essay

Essay. The focus–directrix definition and the sign of B^2-4AC both classify conics. Explain how they agree and why eccentricity is the unifying idea. (about 150 words)

Show model answer

The focus–directrix definition |PF|=e\,\operatorname{dist}(P,d) uses one number e to separate the three curves: e<1 gives the ellipse, e=1 the parabola and e>1 the hyperbola. In standard form e=c/a, with c^2=a^2-b^2 for the ellipse and c^2=a^2+b^2 for the hyperbola, so e is computed from the equation. The discriminant test reaches the same classification from the general equation. The parabola is the borderline case, which explains why it has one focus, one directrix and no centre. A strong answer links these three descriptions with one example.

Lines and Planes in Space

Cartesian equations of lines and planes, distances, relative positions and intersections.

3.1Cartesian Equations of a Line

A line in space is fixed by a point P_0(x_0,y_0,z_0) and a direction vector \mathbf d=(a,b,c)\ne\mathbf 0.

Symmetric form

If abc\neq0, the line through P_0 with direction \mathbf d is

\frac{x-x_0}{a}=\frac{y-y_0}{b}=\frac{z-z_0}{c}.

If a component is zero, say a=0, the line is x=x_0 together with \dfrac{y-y_0}{b}=\dfrac{z-z_0}{c}.

Equivalently, a line is the intersection of two non-parallel planes, a_1x+b_1y+c_1z+d_1=0 and a_2x+b_2y+c_2z+d_2=0. In the plane, a line is a single equation ax+by+c=0.

Example

Find the line through A(1,2,3) and B(3,2,7).

The direction is \overrightarrow{AB}=(2,0,4), or (1,0,2). Since the y-component is zero:

y=2,\qquad \frac{x-1}{1}=\frac{z-3}{2}.

3.2Cartesian Equation of a Plane

A plane is fixed by a point P_0(x_0,y_0,z_0) and a normal vector \mathbf n=(a,b,c)\neq\mathbf0.

Plane equation

a(x-x_0)+b(y-y_0)+c(z-z_0)=0\iff ax+by+cz+d=0,\quad d=-(ax_0+by_0+cz_0).

Through three non-collinear points A,B,C, take \mathbf n=\overrightarrow{AB}\times\overrightarrow{AC}. If the plane meets the axes at (p,0,0), (0,q,0), (0,0,r), then

\frac xp+\frac yq+\frac zr=1.

Example

Find the plane through A(1,0,0), B(0,2,0), C(0,0,3).

Intercept form: x+\tfrac y2+\tfrac z3=1, that is 6x+3y+2z=6.

Check with the normal: \overrightarrow{AB}=(-1,2,0), \overrightarrow{AC}=(-1,0,3), and \overrightarrow{AB}\times\overrightarrow{AC}=(6,3,2).

3.3Distances, Relative Positions, and Common Points

Distance formulas

Let the plane be ax+by+cz+d=0 and let \mathbf d be a direction vector of a line through P_1.

\operatorname{dist}(P_0,\text{plane})=\frac{|ax_0+by_0+cz_0+d|}{\sqrt{a^2+b^2+c^2}},\qquad \operatorname{dist}(P_0,\text{line})=\frac{\bigl|\overrightarrow{P_1P_0}\times\mathbf d\bigr|}{|\mathbf d|}.

For two skew lines with directions \mathbf d_1,\mathbf d_2 through P_1,P_2:

\operatorname{dist}=\frac{\bigl|\overrightarrow{P_1P_2}\cdot(\mathbf d_1\times\mathbf d_2)\bigr|}{|\mathbf d_1\times\mathbf d_2|}.

The angle \theta between two planes satisfies \cos\theta=\dfrac{|\mathbf n_1\cdot\mathbf n_2|}{|\mathbf n_1||\mathbf n_2|}.

ObjectsTestResult
Line \mathbf d, plane \mathbf n\mathbf d\cdot\mathbf n\ne0one common point
\mathbf d\cdot\mathbf n=0, point of line not on planeparallel, no common point
\mathbf d\cdot\mathbf n=0, point of line on planeline lies in the plane
Two planes\mathbf n_1\times\mathbf n_2\ne\mathbf0meet in a line
\mathbf n_1\times\mathbf n_2=\mathbf0parallel or coincident
Two lines\mathbf d_1\times\mathbf d_2=\mathbf0parallel or coincident
\mathbf d_1\times\mathbf d_2\ne\mathbf 0, \overrightarrow{P_1P_2}\cdot(\mathbf d_1\times\mathbf d_2)=0meet in one point
\mathbf d_1\times\mathbf d_2\ne\mathbf 0, \overrightarrow{P_1P_2}\cdot(\mathbf d_1\times\mathbf d_2)\ne0skew

Example

Distance from P_0(1,2,3) to the plane 2x-2y+z-3=0.

\frac{|2-4+3-3|}{\sqrt{4+4+1}}=\frac{2}{3}.

3.4Intersections of Lines and Planes

To intersect a line with a plane, write the line with a parameter t and substitute into the plane equation. To intersect two planes, the direction of the common line is \mathbf n_1\times\mathbf n_2.

Example: line and plane

Intersect the line \dfrac{x-1}{2}=\dfrac{y+1}{1}=\dfrac{z-2}{-1}=t with the plane x+2y+z=7.

Substitute x=1+2t, y=-1+t, z=2-t: (1+2t)+2(-1+t)+(2-t)=7, so 1+3t=7 and t=2.

The common point is (5,1,0). Check: 5+2+0=7.

Example: two planes

Intersect x+y+z=3 with x-y+2z=2.

The normals are (1,1,1) and (1,-1,2), so the direction is (1,1,1)\times(1,-1,2)=(3,-1,-2).

Setting z=0 gives x+y=3, x-y=2, so x=\tfrac52, y=\tfrac12. The line is

\frac{x-5/2}{3}=\frac{y-1/2}{-1}=\frac{z}{-2}.

Q3Chapter 3: Quiz and Problems

Common student mistakes

Common errorIn 2x-y+4z=12, the vector (2,-1,4) lies in the plane

Correct(2,-1,4) is perpendicular to the plane

The coefficients of x,y,z form the normal vector, not a direction inside the plane.

Common errorDistance to a plane: ax_0+by_0+cz_0+d

Correct\dfrac{|ax_0+by_0+cz_0+d|}{\sqrt{a^2+b^2+c^2}}

Do not forget the absolute value and the division by |\mathbf n|.

Common errorTwo lines that are not parallel must meet

CorrectThey may be skew

In space two lines can miss each other without being parallel. Test \overrightarrow{P_1P_2}\cdot(\mathbf d_1\times\mathbf d_2).

Common errorThe line with direction (1,0,2) is \dfrac{x-1}{1}=\dfrac{y-2}{0}=\dfrac{z-3}{2}

Correcty=2,\ \dfrac{x-1}{1}=\dfrac{z-3}{2}

Never divide by zero. A zero component means the coordinate is constant.

Common errorThe line of two planes has direction \mathbf n_1+\mathbf n_2

CorrectThe direction is \mathbf n_1\times\mathbf n_2

The line lies in both planes, so it is perpendicular to both normals.

Multiple-choice quiz

1 The plane through (1,2,3) with normal (2,-1,4) is
2 The distance from the origin to 3x-4y+12z=26 is
3 A line with direction (1,1,-2) and the plane x+y+z=3
4 The x-axis and the line x=0,\ y=1 are
Answered 0 of 4 · Correct 0

Written problems

Problem 1. Find the line of intersection of x-y+z=1 and 2x+y-z=5. (6 marks)

Show solution

The normals are (1,-1,1) and (2,1,-1). Their cross product is (0,3,3), so a direction is (0,1,1).

Adding the equations gives 3x=6, so x=2, and then z=y-1. Taking y=0 gives the point (2,0,-1). Check: 2+0-1=1 and 4-0+1=5.

x=2,\qquad y=z+1\qquad(\text{parametrically }(2,\ t,\ t-1)).

Problem 2. Find the distance between the planes 2x-y+2z=3 and 2x-y+2z=9. (3 marks)

Show solution

The planes are parallel with \sqrt{4+1+4}=3. The distance is \dfrac{|9-3|}{3}=2.

Short essay

Essay. Explain how the relative position of a line and a plane is decided, and why one dot-product test cannot tell "parallel" from "contained". (about 150 words)

Show model answer

With direction \mathbf d and plane normal \mathbf n, the test is \mathbf d\cdot\mathbf n. If it is non-zero the line crosses the plane in exactly one point, found by substituting the line into the plane equation. If it is zero the line is parallel to the plane, but the test only compares directions. It carries no information about position, so parallel and contained look the same. To separate them, test one point of the line in the plane equation: if it satisfies the equation the line lies in the plane, otherwise the line is parallel and distinct.

Parametric Equations of Lines

Several ways to parametrize a line, a ray and a segment, and how to convert between parametric and Cartesian forms.

4.1Introduction to Parametrization of Lines

A parametrization describes a curve as the image of a map t\mapsto\mathbf r(t). Each value of the parameter gives one point, and moving t moves the point along the curve. For a line the map is affine:

\mathbf r(t)=\mathbf r_0+t\,\mathbf d,\qquad t\in\mathbb R.

In coordinates: x=x_0+at, y=y_0+bt, z=z_0+ct. A Cartesian equation tells you whether a point is on the line; a parametrization lets you generate the points.

Example

The line x=1+2t, y=3-t passes through (1,3) at t=0 and has direction (2,-1). At t=2 it passes through (5,1).

4.2General and Directional Parametrization of a Line

Two forms

General form. Any point P_0 on the line and any non-zero direction \mathbf d give a parametrization \mathbf r(t)=P_0+t\mathbf d. Different choices of P_0 and \mathbf d describe the same line with different speeds and origins.

Directional form. Use the unit vector \mathbf u=\mathbf d/|\mathbf d|. Then \mathbf r(s)=P_0+s\,\mathbf u, and |s| is the distance from P_0.

The line through two points A and B is \mathbf r(t)=A+t(B-A).

Example

For A(1,2,3) and B(4,6,15): \mathbf d=(3,4,12) and |\mathbf d|=13.

\text{General: }\mathbf r(t)=(1,2,3)+t(3,4,12),\qquad \text{Directional: }\mathbf r(s)=(1,2,3)+s\Bigl(\tfrac{3}{13},\tfrac{4}{13},\tfrac{12}{13}\Bigr).

The two forms agree when s=13t.

4.3Projective Parametrization of a Line

The affine form A+t(B-A) never reaches the point at infinity. A projective parametrization uses a ratio of linear functions in one parameter u and covers the whole projective line.

Projective form

\mathbf r(u)=\frac{A+u\,B}{1+u},\qquad u\in\mathbb R\cup\{\infty\}.

It gives A at u=0, B at u=\infty, and the point at infinity (the direction of the line) at u=-1. With weights w_A,w_B>0 the general form is \dfrac{w_AA+u\,w_BB}{w_A+u\,w_B}.

Setting t=\dfrac{u}{1+u} recovers the affine form A+t(B-A), with t\in[0,1] corresponding to u\ge0. The parametrization is the line version of the rational Bézier curve of degree one.

Example

For A(1,2) and B(3,6): u=1 gives \dfrac{(1,2)+(3,6)}{2}=(2,4), the midpoint. As u\to-1 the point runs off to infinity in the direction (2,4).

4.4Parametrization of a Line Segment

Segment

\mathbf r(t)=A+t(B-A)=(1-t)A+tB,\qquad 0\le t\le1.

The value t=0 gives A, t=1 gives B, and t=\tfrac12 gives the midpoint. The segment has length |B-A|. Restricting to t\ge0 gives the ray from A through B. The point dividing AB internally in the ratio m:n has t=\dfrac m{m+n}.

Example

Find the point dividing AB in the ratio 1:2, with A(1,2,3) and B(4,6,15).

Here t=\tfrac13:

\bigl(1+1,\ 2+\tfrac43,\ 3+4\bigr)=\bigl(2,\ \tfrac{10}{3},\ 7\bigr).

4.5Conversion from Parametric to Cartesian Equations of a Line

To convert, eliminate the parameter. Solve each coordinate equation for t and equate the results.

x=x_0+at,\ y=y_0+bt,\ z=z_0+ct\ \Longrightarrow\ \frac{x-x_0}{a}=\frac{y-y_0}{b}=\frac{z-z_0}{c}.

Example: in the plane

Plane: x=1+2t, y=3-t. From the first, t=\tfrac{x-1}{2}, so y=3-\tfrac{x-1}{2}, which is

x+2y-7=0.

Check at t=0: (1,3) gives 1+6-7=0.

Example: in space

Space: x=2+t, y=-1+2t, z=3-t. Then x-2=\dfrac{y+1}{2}=-(z-3), which gives two planes

2x-y=5,\qquad x+z=5.

Check at t=1: (3,1,2) gives 6-1=5 and 3+2=5.

4.6Relative Positions of Two Parametric Lines

Let L_1:\ P_1+s\,\mathbf d_1 and L_2:\ P_2+t\,\mathbf d_2.

  1. If \mathbf d_1\times\mathbf d_2=\mathbf 0, the lines are parallel. They coincide when \overrightarrow{P_1P_2}\times\mathbf d_1=\mathbf0.
  2. Otherwise compute \Delta=\overrightarrow{P_1P_2}\cdot(\mathbf d_1\times\mathbf d_2). If \Delta=0 the lines meet in exactly one point; solve P_1+s\mathbf d_1=P_2+t\mathbf d_2 for (s,t).
  3. If \Delta\neq0 the lines are skew, and their distance is |\Delta|/|\mathbf d_1\times\mathbf d_2|.

Example

L_1:\ s(1,1,1) and L_2:\ (1,0,0)+t(0,1,0).

\mathbf d_1\times\mathbf d_2=(1,1,1)\times(0,1,0)=(-1,0,1)\ne\mathbf0, and \Delta=(1,0,0)\cdot(-1,0,1)=-1\ne0.

The lines are skew, at distance \dfrac{1}{\sqrt2}.

Q4Chapter 4: Quiz and Problems

Common student mistakes

Common error\mathbf r(t)=A+t(B-A) with t\in\mathbb R is the segment AB

CorrectThe segment needs 0\le t\le1

With all real t you get the whole line.

Common errorThe line through A and B is \mathbf r(t)=A+tB

Correct\mathbf r(t)=A+t(B-A)

The direction is the difference B-A, not the point B.

Common errorTo intersect two lines, solve P_1+t\,\mathbf d_1=P_2+t\,\mathbf d_2

CorrectUse two parameters: P_1+s\,\mathbf d_1=P_2+t\,\mathbf d_2

The lines meet at different parameter values in general.

Common errorTwo equations in s,t solved, so the lines meet

CorrectCheck the third coordinate too

Three equations, two unknowns. If the third fails, the lines are skew.

Common errorParallel direction vectors mean the same line

CorrectThey mean parallel lines. Coincident only if \overrightarrow{P_1P_2}\times\mathbf d_1=\mathbf0

Parallel lines may be distinct.

Multiple-choice quiz

1 Which parametrization traces exactly the segment AB, with A(2,1) and B(5,5)?
2 Eliminating t from x=1+2t, y=3-t gives
3 In \mathbf r(u)=\dfrac{A+uB}{1+u} the point at infinity occurs at
4 The point dividing AB in the ratio 2:3, with A(0,0,0) and B(10,5,15), is
5 The lines L_1:(1,0,0)+s(1,1,0) and L_2:t(1,1,0) are
Answered 0 of 5 · Correct 0

Written problems

Problem 1. Give Cartesian equations for x=1+t, y=2-t, z=3+2t. (4 marks)

Show solution

Solve for t: x-1=2-y=\dfrac{z-3}{2}. This gives two planes

x+y=3,\qquad 2x-z=-1.

Check at t=1: (2,1,5) gives 3 and 4-5=-1.

Problem 2. Decide whether L_1:(1,2,3)+s(1,0,1) and L_2:(2,0,4)+t(0,1,0) intersect, and find any common point. (6 marks)

Show solution

\mathbf d_1\times\mathbf d_2=(1,0,1)\times(0,1,0)=(-1,0,1)\ne\mathbf0, so the lines are not parallel. With \overrightarrow{P_1P_2}=(1,-2,1), \Delta=-1+0+1=0, so they are coplanar and meet in one point.

At s=1, L_1 gives (2,2,4). At t=2, L_2 gives (2,2,4). The intersection is (2,2,4).

Short essay

Essay. Compare the affine, directional and projective parametrizations of a line. When would you use each? (about 150 words)

Show model answer

The affine form P_0+t\mathbf d is the general tool. Any point and any direction work, and t has no fixed meaning. The directional form uses a unit vector, so the parameter is the signed distance from P_0, which suits distance and arc-length problems. The projective form \dfrac{A+uB}{1+u} covers the whole projective line, including the point at infinity at u=-1, and extends to weighted rational curves. For segments, restrict the affine form to 0\le t\le1. A strong answer names what each parameter measures and gives one use for each form.

Parametric Equations of Planes

Two-parameter descriptions of planes, conversion to Cartesian form, and relative positions.

5.1Parametrization of a Plane

A plane needs two parameters. Take a point P_0 and two non-parallel direction vectors \mathbf u,\mathbf v in the plane.

Definition

\mathbf r(s,t)=P_0+s\,\mathbf u+t\,\mathbf v,\qquad s,t\in\mathbb R.

Through three points A,B,C use P_0=A, \mathbf u=B-A, \mathbf v=C-A. The values s,t\ge0 with s+t\le1 give the triangle ABC.

Example

For A(1,0,0), B(0,2,0), C(0,0,3):

x=1-s-t,\qquad y=2s,\qquad z=3t.

5.2Conversion from Parametric to Cartesian Equations of a Plane

Two methods give the same equation.

  1. Normal vector. Compute \mathbf n=\mathbf u\times\mathbf v and write \mathbf n\cdot(\mathbf r-P_0)=0.
  2. Elimination. Solve two of the coordinate equations for s and t and substitute into the third.

Example

Convert x=1-s-t, y=2s, z=3t.

From the last two, s=\tfrac y2 and t=\tfrac z3. Substituting: x=1-\tfrac y2-\tfrac z3, which is

6x+3y+2z=6.

This matches Example 3.2, as it must.

5.3Relative Positions of Two Parametric Planes

For \Pi_i:\ P_i+s\mathbf u_i+t\mathbf v_i, compute the normals \mathbf n_i=\mathbf u_i\times\mathbf v_i.

  • If \mathbf n_1\times\mathbf n_2=\mathbf0 the planes are parallel. They coincide when \mathbf n_1\cdot\overrightarrow{P_1P_2}=0; otherwise their distance is \dfrac{|\mathbf n_1\cdot\overrightarrow{P_1P_2}|}{|\mathbf n_1|}.
  • If \mathbf n_1\times\mathbf n_2\neq\mathbf0 the planes meet in a line with direction \mathbf n_1\times\mathbf n_2.

Example: parallel

\Pi_1:\ s(1,0,0)+t(0,1,0), which is z=0 with \mathbf n_1=(0,0,1).

\Pi_2:\ (0,0,1)+s(1,0,0)+t(0,1,0) has the same normal, and \mathbf n_1\cdot\overrightarrow{P_1P_2}=1. The planes are parallel at distance 1.

Example: intersecting

\Pi_2':\ s(1,0,0)+t(0,1,1) has \mathbf n_2=(1,0,0)\times(0,1,1)=(0,-1,1).

The direction of the common line is (0,0,1)\times(0,-1,1)=(1,0,0). Both planes contain the origin, so they meet in the x-axis.

Q5Chapter 5: Quiz and Problems

Common student mistakes

Common errorPlane P_0+s\,(1,2,3)+t\,(2,4,6)

CorrectThe vectors \mathbf u,\mathbf v must be independent

Parallel vectors give only a line, since \mathbf u\times\mathbf v=\mathbf0.

Common errorThe normal is \mathbf u\cdot\mathbf v

CorrectThe normal is \mathbf u\times\mathbf v

The dot product is a number. The cross product is a vector perpendicular to both.

Common errorTwo planes in space can be skew

CorrectTwo planes are parallel, coincident or meet in a line

Skewness is only for lines.

Common error0\le s,t\le1 gives the triangle ABC

CorrectIt gives the parallelogram. The triangle needs also s+t\le1

Check the corner s=t=1: it is not in the triangle.

Multiple-choice quiz

1 The plane s(1,2,0)+t(0,1,3) has Cartesian equation
2 In \mathbf r=A+s(B-A)+t(C-A), the triangle ABC is given by
3 Planes with normals (1,2,3) and (2,4,6) are
4 Planes with normals (1,0,0) and (0,1,0) meet in a line with direction
Answered 0 of 4 · Correct 0

Written problems

Problem 1. Find a parametric and a Cartesian equation of the plane through A(1,1,0), B(2,0,1), C(0,2,3). (6 marks)

Show solution

\overrightarrow{AB}=(1,-1,1) and \overrightarrow{AC}=(-1,1,3), so

\mathbf r(s,t)=(1,1,0)+s(1,-1,1)+t(-1,1,3).

The normal is \overrightarrow{AB}\times\overrightarrow{AC}=(-4,-4,0)\parallel(1,1,0), so the plane is x+y=2. Check C: 0+2=2.

Problem 2. Let \Pi_1:(1,0,0)+s(0,1,0)+t(0,0,1) and \Pi_2:s(1,0,1)+t(0,1,0). Find their relative position. (5 marks)

Show solution

\mathbf n_1=(1,0,0) and \mathbf n_2=(1,0,1)\times(0,1,0)=(-1,0,1). Since \mathbf n_1\times\mathbf n_2=(0,-1,0)\ne\mathbf0, the planes meet in a line with direction (0,1,0).

\Pi_1 is x=1 and \Pi_2 is z=x, so the line is (1,\ t,\ 1).

Short essay

Essay. Why does a plane need two parameters, and how does the normal vector connect the parametric and Cartesian forms? (about 150 words)

Show model answer

A plane is a two-dimensional set. Moving in the plane means moving along two independent directions \mathbf u,\mathbf v, so a point is P_0+s\mathbf u+t\mathbf v with two free numbers. The cross product \mathbf n=\mathbf u\times\mathbf v is perpendicular to both directions, so every point of the plane satisfies \mathbf n\cdot(\mathbf r-P_0)=0. This is the Cartesian equation. Going back, one chooses two independent vectors orthogonal to \mathbf n. A good answer shows the conversion on one example and notes that elimination of s,t gives the same result.

Quadric Surfaces in Three-Dimensional Space

Cylinders, ellipsoids, paraboloids and hyperboloids, and the solid regions they bound.

6.1Introduction to Quadric Surfaces

A quadric surface is the zero set of a polynomial of degree two in x,y,z:

Ax^2+By^2+Cz^2+Dxy+Exz+Fyz+Gx+Hy+Iz+J=0.

After a rotation and translation, every non-degenerate quadric takes one of the standard forms below. The usual way to picture one is to study its traces: the curves where it meets the planes x=k, y=k, z=k.

SurfaceStandard equationTraces z=k
Ellipsoid\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=1ellipses, |k|\le c
Hyperboloid, one sheet\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=1ellipses for all k
Hyperboloid, two sheets-\frac{x^2}{a^2}-\frac{y^2}{b^2}+\frac{z^2}{c^2}=1ellipses, |k|\ge c
Elliptic cone\frac{x^2}{a^2}+\frac{y^2}{b^2}=\frac{z^2}{c^2}ellipses, a point at k=0
Elliptic paraboloidz=\frac{x^2}{a^2}+\frac{y^2}{b^2}ellipses, k\ge0
Hyperbolic paraboloidz=\frac{x^2}{a^2}-\frac{y^2}{b^2}hyperbolas, two lines at k=0

Cylinders, where one variable is missing, are treated in Section 6.2.

All possible shapes in space

A second-degree equation in x,y,z describes a quadric surface when it is non-degenerate and one of the following when it is not. Completing the squares in each variable decides which.

ShapeStandard equationExample
Sphere(x-x_0)^2+(y-y_0)^2+(z-z_0)^2=r^2x^2+y^2+z^2=25
Ellipsoid\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=1\frac{x^2}{4}+\frac{y^2}{9}+z^2=1
Hyperboloid, one sheet\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=1x^2+y^2-z^2=1
Hyperboloid, two sheets\frac{z^2}{c^2}-\frac{x^2}{a^2}-\frac{y^2}{b^2}=1z^2-x^2-y^2=1
Elliptic cone\frac{x^2}{a^2}+\frac{y^2}{b^2}=\frac{z^2}{c^2}x^2+y^2=z^2
Elliptic paraboloidz=\frac{x^2}{a^2}+\frac{y^2}{b^2}z=x^2+y^2
Hyperbolic paraboloidz=\frac{x^2}{a^2}-\frac{y^2}{b^2}z=x^2-y^2
Elliptic (circular) cylinder\frac{x^2}{a^2}+\frac{y^2}{b^2}=1x^2+y^2=4
Hyperbolic cylinder\frac{x^2}{a^2}-\frac{y^2}{b^2}=1x^2-y^2=1
Parabolic cylinderx^2=4pz (or y^2=4px, ...)x^2=4z
Two intersecting planes\frac{x^2}{a^2}-\frac{y^2}{b^2}=0x^2-y^2=0, the planes y=\pm x
Two parallel planesx^2=a^2,\ a>0x^2=4, the planes x=\pm2
One plane (double plane)x^2=0x^2-2x+1=0, the plane x=1
A line\frac{x^2}{a^2}+\frac{y^2}{b^2}=0x^2+y^2=0, the z-axis
A single point\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=0x^2+y^2+z^2=0, the origin
Empty set\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=-1, and similarx^2+y^2+z^2+1=0 or x^2=-1

The cases in the lower half of the table are the equations with no shape. For example x^2+y^2+z^2-2x+4y-6z+14=0 becomes (x-1)^2+(y+2)^2+(z-3)^2=0, the single point (1,-2,3), while x^2+y^2+z^2-2x+4y-6z+20=0 gives (x-1)^2+(y+2)^2+(z-3)^2=-6 and has no points.

Trace possibilities

The table lists every possible trace of the standard quadrics in the planes z=k, x=k and y=k. The words in brackets give the values of k for each case, and an ellipse becomes a circle when the two semi-axes are equal.

SurfaceTrace in z=kTrace in x=kTrace in y=k
Ellipsoidellipse (|k|<c), point (|k|=c), empty (|k|>c)ellipse (|k|<a), point (|k|=a), empty (|k|>a)ellipse (|k|<b), point (|k|=b), empty (|k|>b)
Hyperboloid, one sheetellipse for every khyperbola (|k|\ne a), two intersecting lines (|k|=a)hyperbola (|k|\ne b), two intersecting lines (|k|=b)
Hyperboloid, two sheetsempty (|k|<c), point (|k|=c), ellipse (|k|>c)hyperbola for every khyperbola for every k
Elliptic coneellipse (k\ne0), point (k=0)hyperbola (k\ne0), two intersecting lines (k=0)hyperbola (k\ne0), two intersecting lines (k=0)
Elliptic paraboloidellipse (k>0), point (k=0), empty (k<0)parabola for every kparabola for every k
Hyperbolic paraboloidhyperbola (k\ne0), two intersecting lines (k=0)parabola opening downparabola opening up
Elliptic cylinderellipse for every ktwo parallel lines (|k|<a), one line (|k|=a), empty (|k|>a)two parallel lines (|k|<b), one line (|k|=b), empty (|k|>b)
Parabolic cylinder z=x^2/a^2two parallel lines (k>0), one line (k=0), empty (k<0)one lineparabola
Hyperbolic cylinderhyperbola for every ktwo parallel lines (|k|>a), one line (|k|=a), empty (|k|<a)two parallel lines for every k
Quadric surfaces and their traces in 3D. Pick a surface and a plane, then slide k. The grey curves are slices of the surface, the orange sheet is the cutting plane and the blue curve is the trace. Drag to rotate.

6.2Cartesian Equations of Cylinders in Space

If an equation does not contain one of the variables, the surface is a cylinder: every line parallel to that variable's axis through a point of the plane curve lies on the surface.

EquationNameAxis direction
x^2+y^2=r^2circular cylinderz
\frac{x^2}{a^2}+\frac{y^2}{b^2}=1elliptic cylinderz
\frac{x^2}{a^2}-\frac{y^2}{b^2}=1hyperbolic cylinderz
x^2=4pzparabolic cylindery

Example

y^2+z^2=9 has no x, so it is the circular cylinder of radius 3 around the x-axis. x^2=4z has no y, so it is a parabolic cylinder whose rulings are parallel to the y-axis.

6.3Cartesian Equations of Ellipsoids

Ellipsoid

\frac{(x-x_0)^2}{a^2}+\frac{(y-y_0)^2}{b^2}+\frac{(z-z_0)^2}{c^2}=1.

The centre is (x_0,y_0,z_0) and a,b,c>0 are the semi-axes. When a=b=c=r it is a sphere. The volume enclosed is V=\tfrac43\pi abc, and every trace is an ellipse, a point, or empty.

Example

Analyse 4x^2+9y^2+36z^2=36.

Divide by 36: \dfrac{x^2}{9}+\dfrac{y^2}{4}+z^2=1. The semi-axes are a=3, b=2, c=1, and the volume is \tfrac43\pi\cdot6=8\pi.

6.4Cartesian Equations of Paraboloids

Definition

Elliptic paraboloid: z=\dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}. Traces z=k>0 are ellipses; traces x=k and y=k are parabolas. The surface opens upward from its vertex at the origin.

Hyperbolic paraboloid: z=\dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}. Traces z=k\ne0 are hyperbolas, the trace z=0 is the pair of lines y=\pm\tfrac bax, and the surface is a saddle at the origin.

Example

z=x^2+y^2: the trace at height k>0 is the circle of radius \sqrt k, and the trace x=0 is the parabola z=y^2. It is a paraboloid of revolution about the z-axis.

z=x^2-y^2: along the x-axis the surface curves up, along the y-axis it curves down.

6.5Cartesian Equations of Hyperboloids

Definition

One sheet: \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}-\dfrac{z^2}{c^2}=1. A single connected surface; the traces z=k are ellipses that grow with |k|. It is doubly ruled, so it is built from straight lines (cooling towers use this).

Two sheets: -\dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}+\dfrac{z^2}{c^2}=1. Two separate surfaces, one for z\ge c and one for z\le-c.

Cone: \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}=\dfrac{z^2}{c^2}, the surface separating the two cases.

Example

x^2+y^2-z^2=1: the trace at height k is the circle of radius \sqrt{1+k^2}, with smallest radius 1 at k=0.

x^2+y^2-z^2=-1: the trace at height k is a circle of radius \sqrt{k^2-1} and exists only for |k|\ge1, so there are two sheets.

6.6Quadric Inequalities and Solid Regions

Replacing "=" with an inequality turns a surface into a solid. For example \dfrac{x^2}{a^2}+\dfrac{y^2}{b^2}+\dfrac{z^2}{c^2}\le1 is the solid ellipsoid, and the strict version is its interior. Several inequalities together describe the common part of the regions.

Example: shell

Describe 1\le x^2+y^2+z^2\le4.

It is the spherical shell between radius 1 and radius 2. Its volume is \tfrac43\pi(2^3-1^3)=\tfrac{28\pi}{3}.

Example: paraboloid cap

Describe x^2+y^2\le z\le4.

It is the solid above the paraboloid z=x^2+y^2 and below the plane z=4. The cross-section at height z is a disc of area \pi z, so the volume is

\int_0^4\pi z\,dz=8\pi.

Q6Chapter 6: Quiz and Problems

Common student mistakes

Common errorx^2+y^2-z^2=1 is a hyperboloid of two sheets

CorrectIt has one sheet

Count the minus signs. One minus on the left with +1 on the right gives one sheet. Two minus signs give two sheets.

Common errory^2+z^2=4 is a circle

CorrectIt is a cylinder

A circle needs the extra condition x=\text{const}. With x free the circle is translated along the axis.

Common errorz=x^2-y^2 is a paraboloid of revolution

CorrectIt is a hyperbolic paraboloid (a saddle)

The minus sign makes the horizontal traces hyperbolas.

Common errorThe volume of an ellipsoid is \frac43\pi a^2b^2c^2

CorrectV=\frac43\pi abc

The semi-axes enter once each, as a,b,c and not as their squares.

Common errorEvery trace of a hyperboloid is a hyperbola

CorrectTraces can be ellipses, hyperbolas, lines or a point

The traces depend on the plane. For the one-sheet hyperboloid the horizontal traces are ellipses.

Multiple-choice quiz

1 \dfrac{x^2}{4}+\dfrac{y^2}{9}+\dfrac{z^2}{16}=1 is
2 x^2+y^2-z^2=-4 is
3 z=x^2-y^2 is
4 The volume enclosed by x^2+4y^2+9z^2=36 is
5 In space, y^2+z^2=4 is
6 The trace of x^2+y^2-z^2=1 in the plane x=1 is
7 The trace of z=x^2-y^2 in the plane z=0 is
8 The traces of z=x^2+y^2 in the planes y=k are
9 In space, x^2+y^2=0 describes
10 The equation x^2+y^2+z^2+1=0 describes
Answered 0 of 10 · Correct 0

Written problems

Problem 1. Identify x^2+y^2-4z^2=4 and describe its traces z=k and x=0. (5 marks)

Show solution

Divide by 4: \dfrac{x^2}{4}+\dfrac{y^2}{4}-z^2=1, a hyperboloid of one sheet about the z-axis.

The trace z=k is the circle x^2+y^2=4(1+k^2) of radius 2\sqrt{1+k^2}, smallest at k=0. The trace x=0 is the hyperbola y^2-4z^2=4.

Problem 2. List every kind of trace of the elliptic cylinder \dfrac{x^2}{4}+\dfrac{y^2}{9}=1 in the planes z=k, x=k and y=k. (5 marks)

Show solution

z=k: the ellipse \frac{x^2}{4}+\frac{y^2}{9}=1 for every k.

x=k: y^2=9\bigl(1-\tfrac{k^2}{4}\bigr), so two parallel lines y=\pm3\sqrt{1-k^2/4} for |k|<2, one line for |k|=2, empty for |k|>2.

y=k: x^2=4\bigl(1-\tfrac{k^2}{9}\bigr), so two parallel lines for |k|<3, one line for |k|=3, empty for |k|>3.

Problem 3. Describe x^2+y^2+z^2\le9,\ z\ge0 and find its volume. (3 marks)

Show solution

It is the solid upper half of the ball of radius 3. Its volume is \tfrac12\cdot\tfrac43\pi\cdot3^3=18\pi.

Short essay

Essay. Explain how traces are used to identify a quadric surface. Use the ellipsoid, the elliptic paraboloid and the hyperboloid of one sheet as examples. (about 150 words)

Show model answer

A trace is the curve where the surface meets a plane such as z=k. Reading how the traces change with k reveals the surface. For the ellipsoid, the traces are ellipses that shrink to points at |k|=c and are empty beyond. For z=\frac{x^2}{a^2}+\frac{y^2}{b^2} the traces z=k are ellipses for k>0, while the traces x=k and y=k are parabolas. For the one-sheet hyperboloid, the traces z=k are ellipses for every k, growing with |k|, and the vertical traces are hyperbolas. A good answer uses horizontal and vertical traces together.

Parametric Surfaces and Level Sets

Surfaces described by two parameters, by level sets of a function, and the passage between the two descriptions.

7.1Parametric Equations of Surfaces

Definition

A parametric surface is the image of a map (u,v)\mapsto\mathbf r(u,v)=\bigl(x(u,v),y(u,v),z(u,v)\bigr). At a regular point the vector \mathbf r_u\times\mathbf r_v is normal to the surface.

SurfaceParametrization
Graph z=f(x,y)(u,\ v,\ f(u,v))
Cylinder of radius R(R\cos\theta,\ R\sin\theta,\ z)
Sphere of radius R(R\sin\varphi\cos\theta,\ R\sin\varphi\sin\theta,\ R\cos\varphi), 0\le\varphi\le\pi
Torus, radii R>r\bigl((R+r\cos v)\cos u,\ (R+r\cos v)\sin u,\ r\sin v\bigr)

Example

For the cylinder \mathbf r(\theta,z)=(R\cos\theta,R\sin\theta,z): \mathbf r_\theta=(-R\sin\theta,R\cos\theta,0), \mathbf r_z=(0,0,1), and

\mathbf r_\theta\times\mathbf r_z=(R\cos\theta,\ R\sin\theta,\ 0),

which points radially outward, as expected.

7.2Level Curves and Level Surfaces

Definition

For f(x,y), a level curve is f(x,y)=c. For f(x,y,z), a level surface is f(x,y,z)=c. The gradient \nabla f is perpendicular to the level set through each point, so the tangent plane to f(x,y,z)=c at P_0 is

\nabla f(P_0)\cdot(\mathbf r-P_0)=0.

Example: level curves

f(x,y)=x^2-y^2. For c\ne0 the level curves are hyperbolas; for c=0 the level curve is the pair of lines y=\pm x.

Example: level surfaces

f(x,y,z)=x^2+y^2-z^2. The level surface is a one-sheet hyperboloid for c>0, a cone for c=0 and a two-sheet hyperboloid for c<0. This reproduces Section 6.5 in a single family.

Example: tangent plane

Tangent plane to x^2+y^2+z^2=14 at (1,2,3). Here \nabla f=(2x,2y,2z)=(2,4,6), so

2(x-1)+4(y-2)+6(z-3)=0\iff x+2y+3z=14.

7.3Cartesian and Parametric Representations of Surfaces

To go from parametric to Cartesian form, eliminate the parameters. To go the other way, choose parameters that make the equation hold identically, usually by using an identity such as \cos^2+\sin^2=1 or \cosh^2-\sinh^2=1.

CartesianParametric
x^2+y^2+z^2=R^2(R\sin\varphi\cos\theta,\ R\sin\varphi\sin\theta,\ R\cos\varphi)
\frac{x^2}{a^2}+\frac{y^2}{b^2}+\frac{z^2}{c^2}=1(a\sin\varphi\cos\theta,\ b\sin\varphi\sin\theta,\ c\cos\varphi)
z=x^2+y^2(\rho\cos\theta,\ \rho\sin\theta,\ \rho^2)
z^2=x^2+y^2, z\ge0(\rho\cos\theta,\ \rho\sin\theta,\ \rho)
\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=1(a\cosh u\cos v,\ b\cosh u\sin v,\ c\sinh u)

Example: verification

Check the one-sheet hyperboloid parametrization. With x=a\cosh u\cos v, y=b\cosh u\sin v, z=c\sinh u:

\frac{x^2}{a^2}+\frac{y^2}{b^2}-\frac{z^2}{c^2}=\cosh^2u\,(\cos^2v+\sin^2v)-\sinh^2u=\cosh^2u-\sinh^2u=1.

Example: elimination

Eliminate the parameters from (\rho\cos\theta,\rho\sin\theta,\rho^2): x^2+y^2=\rho^2=z. The surface is the paraboloid z=x^2+y^2.

Q7Chapter 7: Quiz and Problems

Common student mistakes

Common error\nabla f points along the level curve

Correct\nabla f is perpendicular to the level set

The tangent line or plane is the one with \nabla f as its normal.

Common errorSphere: \varphi\in[0,2\pi]

Correct\varphi\in[0,\pi] and \theta\in[0,2\pi]

With \varphi up to 2\pi every point is covered twice.

Common error(\rho\cos\theta,\rho\sin\theta,\rho) is the whole cone z^2=x^2+y^2

CorrectIt is the upper nappe z\ge0

Eliminating the parameter loses the sign restriction. Allow \rho<0 for both nappes.

Common errorLevel surfaces f=c_1 and f=c_2 can cross

CorrectThey never meet if c_1\ne c_2

A point cannot have two different values of f.

Multiple-choice quiz

1 (u\cos v,\ u\sin v,\ u^2) parametrizes
2 The gradient of f=x^2+y^2+z^2 at (1,2,2) is
3 The level set x^2+y^2-z^2=c with c<0 is
4 The tangent plane to x^2+y^2+z^2=9 at (2,1,2) is
5 In (R\sin\varphi\cos\theta,\ R\sin\varphi\sin\theta,\ R\cos\varphi) the angle \varphi is
Answered 0 of 5 · Correct 0

Written problems

Problem 1. Eliminate u,v from (2\cosh u\cos v,\ 3\cosh u\sin v,\ \sinh u). (4 marks)

Show solution
\frac{x^2}{4}+\frac{y^2}{9}-z^2=\cosh^2u\,(\cos^2v+\sin^2v)-\sinh^2u=1.

The surface is the one-sheet hyperboloid \dfrac{x^2}{4}+\dfrac{y^2}{9}-z^2=1.

Problem 2. Find the tangent plane to z=x^2+y^2 at (1,1,2). (4 marks)

Show solution

Write F=x^2+y^2-z. Then \nabla F=(2x,2y,-1)=(2,2,-1) at the point, so

2(x-1)+2(y-1)-(z-2)=0\iff 2x+2y-z=2.

Check: 2+2-2=2.

Short essay

Essay. Compare parametric and implicit (Cartesian) representations of a surface. What is each best at? (about 150 words)

Show model answer

A parametric form \mathbf r(u,v) generates points directly, which makes it ideal for plotting, for restricting to a patch and for computing normals \mathbf r_u\times\mathbf r_v. An implicit form f(x,y,z)=c tests membership at once and gives the normal as \nabla f, so it suits inside/outside questions and intersections of solids. Converting from parametric to implicit means eliminating the parameters. Converting the other way means finding parameters that satisfy the equation identically, often through \cos^2+\sin^2=1 or \cosh^2-\sinh^2=1. A good answer gives one example in each direction.

Mock Exam

Eight questions, 70 marks in total. Suggested time: 2 hours. Attempt every question before opening the solutions; the numbers in square brackets are the marks for each step.

Q1Completing the square and conics 8 marks

Consider the curve 4x^2+9y^2-16x+18y-11=0.

  1. Complete the square and write the equation in standard form. [4]
  2. Identify the curve and find its centre, foci and eccentricity. [4]
Show solution and marking

(a) Group: 4(x^2-4x)+9(y^2+2y)=11 [1]. Complete both squares: 4(x-2)^2-16+9(y+1)^2-9=11 [2]. So 4(x-2)^2+9(y+1)^2=36, that is

\frac{(x-2)^2}{9}+\frac{(y+1)^2}{4}=1.\quad[1]

(b) It is an ellipse with centre (2,-1) [1], a=3, b=2, c=\sqrt{9-4}=\sqrt5. The foci are (2\pm\sqrt5,\,-1) [2] and e=\dfrac{\sqrt5}{3} [1].

Q2Parabola and hyperbola 8 marks

  1. Find the vertex, focus and directrix of x^2+4x-8y+12=0. [4]
  2. For the hyperbola 25y^2-16x^2=400, find the foci and the asymptotes. [4]
Show solution and marking

(a) (x+2)^2-4-8y+12=0 gives (x+2)^2=8(y-1) [2]. So 4p=8, p=2. Vertex (-2,1) [1]; focus (-2,3) and directrix y=-1 [1].

(b) Divide by 400: \dfrac{y^2}{16}-\dfrac{x^2}{25}=1 [1]. The transverse axis is vertical, c^2=16+25=41, so the foci are (0,\pm\sqrt{41}) [2]. The asymptotes are y=\pm\dfrac45x [1].

Q3Planes and distances 8 marks

Let A(1,0,2), B(2,1,0), C(0,3,1) and D(1,1,1).

  1. Find the Cartesian equation of the plane ABC. [3]
  2. Find the distance from D to this plane. [2]
  3. The line through D with direction (1,1,1) meets the plane at E. Find E. [3]
Show solution and marking

(a) \overrightarrow{AB}=(1,1,-2), \overrightarrow{AC}=(-1,3,-1), and the cross product is (5,3,4) [2]. The plane is 5x+3y+4z=13 [1]. Check: A gives 5+8=13, B gives 10+3=13, C gives 9+4=13.

(b) \dfrac{|5+3+4-13|}{\sqrt{25+9+16}}=\dfrac1{\sqrt{50}}=\dfrac{\sqrt2}{10} [2].

(c) Points of the line are (1+t,1+t,1+t) [1]. Substituting: 12(1+t)=13, so t=\tfrac1{12} [1], and E=\bigl(\tfrac{13}{12},\tfrac{13}{12},\tfrac{13}{12}\bigr) [1].

Q4Parametric lines and planes 8 marks

Let L_1:\ (1,2,3)+s(2,-1,1) and L_2:\ (0,1,5)+t(1,1,-2).

  1. Show that the lines intersect and find the common point. [5]
  2. Find a Cartesian equation of the plane containing both lines. [3]
Show solution and marking

(a) \mathbf d_1\times\mathbf d_2=(1,5,3)\ne\mathbf0, so the lines are not parallel [1]. With \overrightarrow{P_1P_2}=(-1,-1,2), \Delta=-1-5+6=0 [2], so they meet in exactly one point. Solving 1+2s=t, 2-s=1+t gives s=0, t=1 [1], and the third coordinate agrees (3=5-2). The common point is (1,2,3) [1].

(b) The normal is (1,5,3) [1], so the plane is x+5y+3z=c with c=1+10+9=20 [1]: x+5y+3z=20 [1]. Check with (0,1,5): 0+5+15=20.

Q5Quadric surfaces 8 marks

  1. Identify the surface x^2+4y^2-z^2=4 and describe its traces z=k. [3]
  2. Find the volume of the solid x^2+y^2\le z\le 9. [3]
  3. Give a parametrization of the surface in (a). [2]
Show solution and marking

(a) Divide by 4: \dfrac{x^2}{4}+y^2-\dfrac{z^2}{4}=1, a hyperboloid of one sheet [1]. The trace z=k is \dfrac{x^2}{4+k^2}+\dfrac{y^2}{(4+k^2)/4}=1 [1], an ellipse with semi-axes \sqrt{4+k^2} and \tfrac12\sqrt{4+k^2} for every k [1].

(b) The cross-section at height z is a disc of area \pi z [1], so V=\displaystyle\int_0^9\pi z\,dz [1] =\dfrac{81\pi}{2} [1].

(c) (2\cosh u\cos v,\ \cosh u\sin v,\ 2\sinh u) [1]. Check: \dfrac{x^2}{4}+y^2-\dfrac{z^2}{4}=\cosh^2u-\sinh^2u=1 [1].

Q6Hyperbolic functions and level surfaces 10 marks

  1. Prove from the definitions that \cosh 2x=\cosh^2x+\sinh^2x. [3]
  2. Show that (a\cosh t,\ b\sinh t) lies on \dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}=1. [2]
  3. On \dfrac{x^2}{9}-\dfrac{y^2}{16}=1 find the point with t=\ln3 in the parametrization of (b). [3]
  4. Find the tangent plane to the level surface x^2+y^2-z^2=1 at (1,0,0). [2]
Show solution and marking

(a) \cosh^2x+\sinh^2x=\dfrac{(e^x+e^{-x})^2+(e^x-e^{-x})^2}{4} [1] =\dfrac{2e^{2x}+2e^{-2x}}{4} [1] =\dfrac{e^{2x}+e^{-2x}}{2}=\cosh2x [1].

(b) \dfrac{x^2}{a^2}-\dfrac{y^2}{b^2}=\cosh^2t-\sinh^2t [1], and \dfrac{(e^t+e^{-t})^2-(e^t-e^{-t})^2}{4}=\dfrac44=1 [1].

(c) \cosh(\ln3)=\dfrac{3+1/3}{2}=\dfrac53 [1] and \sinh(\ln3)=\dfrac{3-1/3}{2}=\dfrac43 [1]. The point is \bigl(3\cdot\tfrac53,\ 4\cdot\tfrac43\bigr)=\bigl(5,\tfrac{16}3\bigr) [1].

(d) \nabla f=(2x,2y,-2z)=(2,0,0) [1], so the plane is 2(x-1)=0, that is x=1 [1].

Q7Conic sections and traces 10 marks

  1. Name the curve cut from the cone x^2+y^2=z^2 by each of the planes z=2, z=x+1 and x=1. [3]
  2. Find the traces of x^2+y^2-z^2=1 in the planes x=0, x=1 and x=2, and name each curve. [4]
  3. For which values of k is the trace of z^2-x^2-y^2=1 in the plane z=k non-empty? Describe it. [3]
Show solution and marking

(a) z=2: x^2+y^2=4, a circle [1]. z=x+1: y^2=2x+1, a parabola, as the plane is parallel to a generator [1]. x=1: z^2-y^2=1, a hyperbola [1].

(b) x=0: y^2-z^2=1, a hyperbola opening along the y-axis [1]. x=1: y^2-z^2=0, the two lines y=\pm z [2]. x=2: y^2-z^2=-3, that is z^2-y^2=3, a hyperbola opening along the z-axis [1].

(c) In z=k the equation is x^2+y^2=k^2-1 [1]. For |k|>1 it is a circle of radius \sqrt{k^2-1} [1]; for |k|=1 it is the single point (0,0,\pm1) [0.5]; for |k|<1 it is empty [0.5].

Q8Equations with no shape 10 marks

  1. State the set described by each equation: (i) x^2+y^2-4x+6y+13=0; (ii) x^2-4y^2=0; (iii) x^2+2x+5=0 in the plane; (iv) x^2-6x+9=0 in the plane; (v) x^2=9 in the plane. [5]
  2. Show that x^2+y^2+z^2-2x+4y-6z-11=0 is a sphere and give its centre and radius. [3]
  3. What set of \mathbb R^3 is described by x^2+y^2=0? [2]
Show solution and marking

(a) (i) (x-2)^2+(y+3)^2=0: the single point (2,-3) [1]. (ii) (x-2y)(x+2y)=0: the two lines y=\pm\tfrac x2 [1]. (iii) (x+1)^2=-4: the empty set [1]. (iv) (x-3)^2=0: the single line x=3 [1]. (v) x=\pm3: two parallel lines [1].

(b) (x-1)^2-1+(y+2)^2-4+(z-3)^2-9=11 [1], so (x-1)^2+(y+2)^2+(z-3)^2=25 [1]. It is a sphere with centre (1,-2,3) and radius 5 [1].

(c) x=y=0 [1], with z free: the z-axis [1].